English
SPH10H-FM
21
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom friend by
speaking any word loudly enough.The most effortless
way to trigger intercom VOX is to blow into the microphone
as if blowing dust off the microphone. If you start an
intercom conversation by VOX, the intercom terminates
automatically when you and your intercom friend remain
silent for 20 seconds. However, if you manually start an
intercom conversation by tapping the Jog Dial, you have
to terminate the intercom conversation manually.
However, even when this feature is enabled, if you
terminate intercom conversation manually with the
Jog Dial, you are not able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial
to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise.
If you tap the Jog Dial to start an intercom conversation,
it is not terminated by 20 seconds of silence. After
turning SPH10H-FM off and on, you can start intercom
by voice again.
9.4 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default
Enable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
You can disable voice prompts by configuration setting,
but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for factory reset
9.5 RDS AF setting (Radio Data System: Alternative
Frequencies) (Factory Default: Disabled)
Voice Prompt
“RDS AF setting”
Factory Default
Disable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
RDS AF allows a receiver to re-tune to a different frequency
providing the same station has an additional frequency. In
RDS AF, the receiver will “re-tune” to the second frequency
location when the first signal becomes too weak. With RDS
AF enabled on the receiver, a radio station with more than
one frequency can be used.