| SC-HR-01
9
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Bluetooth License
The Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under
license. Other trademarks and trade names are those of their respective owners.
The product is compliant with and adopts the Bluetooth
®
Specification 3.0 and has successfully passed all interoperability
tests that are specified in the Bluetooth® specification. However, interoperability between the device and other
Bluetooth
®
-enabled products is not guaranteed.
WEEE (Waste Electrical and Electronic Equipment)
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and
electronic products, batteries, and accumulators must be taken to separate collection at the end of their
working life. This requirement applies to the European Union and other locations where separate collection
systems are available. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point
for recycling.
SAFETY INFORMATION
Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or
damage to property.
Product Storage and Management
●
Keep the product free of dust. It may damage mechanical and electronic parts of the product.
●
Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the
battery, and/or melt plastic parts of the product.
●
Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and
damage electronic circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents
as this may damage the product.
●
Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product.
●
Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.
●
Do not disassemble, repair or modify the product as this may damage the product and invalidate the product
