33
AT+BTCSD<cr>
Function :
Delete the info of all the paired devices stored in your PARANI10.
Response :
<cr><lf>OK<cr><lf>
Description :
This AT command just deletes the info of paired devices stored on
PARANI10’s Flash memory. To delete the same info resides on PARANI10’s
RAM, you have to do software reset or hardware reset.
AT+BTFP,n<cr>
Function :
Force your PARANI10 to generate passkey automatically.
Response :
<cr><lf>OK<cr><lf>
Description :
Once paired, your PARANI10 uses the stored link key. By using this AT
command, you can make Bluetooth connection with a new link key. When n is
set to 1, your PARANI10 newly generates a link key during connection
process.
AT+UARTCONFIG, baudrate, parity, stopbit,handshaking<cr>
Function :
Configure the serial port of your PARANI10.
Response :
<cr><lf>OK<cr><lf>
Description :
By using this AT command, you can reconfigure the serial port of your
PARANI10. You can set baudrate, parity, stopbit . To make this command
result active, you should do soft-reset or turn off/on your PARANI10. The
following values are permitted for each parameter.
•
Baudrate = 1200, 2400, 9600, 19200, 38400, 57600 or 115200.
230400 (only for Parani10102/202/ESD)
•
Parity = N (No parity), E (Even parity) or O (Odd parity).
•
Stopbit = 1 or 2.
•
Handshaking = 1 or 0
(If ‘1’, hardware handshaking will be used. If ‘0’, handshaking function of
Parani10 will be turned off)
Full AT commands set
No.
Command
Response
Comments
1)
AT<cr>
<cr><lf>OK<cr><lf>
2)
ATZ<cr>
<cr><lf>OK<cr><lf>
Drops all connections, disable Inquiry
and Page scans. Reset the Bluetooth
Содержание Parani10
Страница 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Страница 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Страница 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Страница 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
