10
2.5 Installing the Wired Microphone
If you have a full face helmet, you can use the wired
microphone.
1. Peel off the cover of the hook and loop
fastener for wired microphone to expose the
adhesive tape. Then, attach the hook and
loop fastener on the inside of the helmet’s
chin guard.
2. Attach the wired microphone to the hook
and loop fastener for wired microphone.
Note:
•
You can use the boom microphone holder after
attaching the hook and loop fastener for boom
microphone holder on it to ensure secure
installation.
•
Make sure that the microphone is located
properly close to your mouth when you wear the
helmet. Adjust the direction of the microphone
so that the fin side of the microphone is facing
outward, away from your lips.
Fin