5
3. 10R-OEM-01 CONFIGURATION SETTING
You can set the configuration of the 10R-OEM-01 by the voice menu instruction as below.
1. To enter into voice configuration menu, press and hold the Center Button for 12 seconds until the LED
shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying
“Configuration menu”
.
2. Tap the (+) Button or (-) Button to navigate between the menus. You will hear voice prompts for each
menu items as below.
3. You can enable the feature or execute the command by tapping the Center Button.
4. If you want to exit the configuration immediately, tap the (+) Button or (-) Button until you hear a voice
prompt saying
“Exit configuration
”, then tap the Center Button.
The voice prompt for each menu item is as below:
(1) Phone pairing
(2) Multipoint pairing
(3) Phone selective pairing
(4) Media selective pairing
(5) Speed dial
(6) VOX phone
(7) VOX intercom
(8) VOX sensitivity
(9) Voice prompt
(10) Sidetone
(11) Delete all pairings
(12) Factory reset
(13) Exit configuration
