ADVANCED COMMUNICATIONS & SENSING
Rev 0.9 – September 2010
30
www.semtech.com
User’s Guide
SX8634/35/44/45 Evaluation Kit
5.6 Statusbar
The status bar shows useful information on the the status of the GUI and the EVK.
Figure 37: Statusbar
The
product
field shows the detected product on the EVK (SX8634, SX8635, SX8644 or SX8645).
The
SPM
field shows the origin of the SPM. This will be QSM, NVM1, NVM2 or NVM3.
The last two fields show the CRC of the SPM calculated by the GUI and if that CRC corresponds to the CRC of the
EVK.
A green LED shows both CRCs are identical.
An orange LED shows that the CRCs are different. Clicking the ‘refresh’ item
will synchronize the GUI and the
EVK and the LED will turn green.
The fields at the bottom of the Status bar show error messages or the actual name of the used SPM file.
E.g. an error message will appear if the GUI tries to connect to an EVK which is not powered.
Figure 38: Statusbar with error message
In case the user opens or saves a SPM file then the current SPM file name appears at the right bottom side of the
status bar.
Figure 39: Statusbar with SPM file
