background image

FCC Caution:

 Any changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, including interference that may 
cause undesired operation. 

IMPORTANT NOTE 

To comply with FCC and Industry Canada RF radiation exposure limits for general population, the 
antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20cm is 
maintained between the radiator (antenna) and all persons at all times and must not be co-located or 
operating in conjunction with any other antenna or transmitter. 

 

Industry Canada statement 

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two 
conditions: 

(1) This device may not cause interference; and  

(2) This device must accept any interference, including interference that may cause undesired operation of 
the device. 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de 
licence. L’exploitation est autorisée aux deux conditions suivantes: 

1) l’appareil ne doit pas produire de brouillage; 

2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 
susceptible d’en compromettre le fonctionnement 

 

RF Radiation Hazard Warning 

To ensure compliance with FCC and Industry Canada RF exposure requirements, this device must be 
installed in a location where the antennas of the device will have a minimum distance of at least 20 cm 
from all persons. Using higher gain antennas and types of antennas not certified for use with this product is 
not allowed. The device shall not be co-located with another 

Déclaration d'exposition aux radiations:

 

Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les EtatUnis et le 
Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que 
décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être 
conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de 
sortie la plus faible si une telle fonction est disponible. 

 

Содержание LoRa Edge Tracker Reference Design Evaluation Kit



































Отзывы: