Smart Building User Guide |
Proprietary Information
| Semtech Corporation
Welcome!
The Smart Building Reference kit is designed to provide validation of the network coverage within a
building, accelerate solution development and facilitate a portable demonstration to a wide range of
stakeholders.
By moving the location of the sensors to different spots around the building, users can determine a
gateway’s range of coverage.
By relying on readily-available hardware, solution developers can focus on providing customer value
through data collection and analysis while using off-the-shelf hardware available from external suppliers.
The self-contained nature of the Reference Kit makes it easy to set up, take down and move the network
in a matter of minutes.
All data collected in the kit is displayed on a dashboard accessible by the user via a browser. The dashboard
shows the type of display which can be created with the data collected. The URL for the dashboard and
how to locate the log in credentials for your kit, are explained under the
Getting Started
section of this
guide.
Note
: The reference kit does not allow access to the underlying data directly or the ability to change the
LoRaWAN Network Server (LNS) to which the gateways are connected. If those are desired requirements,
please contact Semtech at
Additionally the user may separately access a dashboard that shows a permanent installation of a Smart
Building Reference Solution Kit inside an office facility. This provides the user with a rich set of historical
data to use in demonstrations. To access this dashboard, log in to the following site, using the credentials
below.
URL:
lora-developers.semtech.com/smart-building-kit
Login
: SemtechDemo1
Password
: LoraWan592
The data in each dashboard is stored for a maximum of 30 days.
In this document we explain how to set up and use the kit.
