IFU1911203 - HCSRE Issue 4.doc
© Semmco LPS Ltd 2015 – This document is not to be copied or reproduced without the permission of Semmco LPS Ltd
STORAGE AND USAGE CONDITIONS
The device can be stored for up to 15 years (after satisfactory inspections
at 6 years, 9 years and 12 years, are carried out by Semmco LPS Ltd).
Official regulations on inspection must be observed. For units which are
routinely carried, the following visual checks must be carried out daily.
•
The carrying case must be free from damage.
•
The security tag must be in place and un-damaged.
•
The vacuum indicator must be blue.
If these conditions are not met the unit should not be used
and should be replaced with a new unit
RETURN CONDITIONS
The protective device contains potassium superoxide (K02) therefore
transportation hazard regulations apply when in transport. The devices can
only be transported by road or rail and should be returned in their original
transportation packaging and marked with the appropriate hazard
identification label. When returning damaged or used devices they must be
sealed in a plastic bag prior to placing in the transportation packaging.
The devices can be returned for disposal or rework to the Reclamation
Unit at the address below:
Semmco LPS Ltd
9 Kestrel Way, Goldsworth Trading Estate
Woking
Surrey
GU21 3BA
England
ORDERING INFORMATION
Description
Part No.
HEAD 15 CSRE CARRY CASE
802.001.20
HEAD 15 CSRE – Rework
on request
HEAD 15 CSRE – 6 & 9 & 12 year inspection
on request
HEAD 15 CSRE – Reclamation
on request
HEAD 15 CSRE – TRAINING SET CARRY CASE
802.001.25
HEAD 15 CSRE – ALARM TRAINER UNIT
802.001.26
Semmco LPS Ltd
9 Kestrel Way, Goldsworth Trading Estate
Woking
Surrey
GU21 3BA
England
Tel: +44 (0) 1483 757200
Fax: +44 (0) 1483 740795
Web: www.semmco.com
e-mail: [email protected]
PRODUCT IDENTIFICATION – HEAD 15 CSRE CARRY CASE
KEY
1
HEAD 15 CSRE IN VAC PACK
2
VACUUM INDICATOR
3
CARRY CASE
4
DATE AND SERIAL NUMBER LABEL
5
SECURITY TAG
KEY
1
OVER PRESSURE VALVE FITTED TO BACK OF HOOD
2
PRESSURE RELIEF VALVE
3
OXYGEN STARTER
4
RESERVOIR BAG
5
OXYGEN GENERATOR
6
SUPPLY TUBE
7
MASK AND HARNESS
8
WARNING LED
9
HEAT SINK
10 FRONT PORT
11 VISOR
12 HOOD
TECHNICAL DATA
•
Inspiratory/expiratory resistance at 50L/min
-5 to +7 mbar
•
Temperature Inhaled gas
< 50°C
•
Breathing Bag Volume
≥
8 litre
•
CO² content (inhaled gas)
< 2 vol%
•
Operating time according to EN13794
15 minutes
•
Weight with case
3kg
•
Weight without case
1.6kg
•
Case dimensions (mm)
335 x 300 x 165
•
Temperature: Storage
-30 to + 60°C
•
Max surface temp
< 100°C
EU DECLARATION OF CONFORMITY
Manufacturer:
Semmco LPS Ltd
9 Kestrel Way, Goldsworth Park Trading Estate
Woking, Surrey GU21 3BA
Declares that the PPE described below
HEAD 15 CSRE Set – CC
802.001.20
1.
Is in conformity with the PPE Regulation (EU) 2016/425 and with the relevant
requirements of the appropriate sections of the harmonized standards EN13794,
EN145 for general specification and performance and EN1146 for the hood, it is
deemed to meet the basic safety and health requirements (Annex 11) of the
Regulation.
2.
Are identical to the PPE which is the subject of EC certification of conformity No.
GB19/963116 issued by
SGS United Kingdom Ltd
Systems & Services Certification
202B Worle Parkway, Weston-superMare,
BS22 6WA
3.
Are subject to the procedures set out in PPE Regulation (EU) 2016/425 under the
supervision of the notified body SGS United Kingdom Ltd. NB0120
Signed:
Authorised Signatory
On behalf of Semmco LPS Ltd
Issue: 04
Dated:
July 2019
Telephone: +44 (0) 1483 757200 Fax: +44 (0) 1483-740795
Email: [email protected]
