Semmco LPS Limited
| 9 Kestrel Way | Woking | Surrey | GU21 3BA | UK
Tel: +44 (0)1483 757200 | Fax: +44 (0)1483 740795 | saleslps@semmco.com | www.semmco.com
Registered in England No. 9240524 | VAT No.: GB204444541
7. Insert mouthpiece and take a breath
8. Adjust the neck strap, fit nose clip
and exhale into the mouthpiece
9
.
If needed, don the face shield and
pull the yellow loops to tighten
10. Make a safe escape
around the neck
NOTE:
The action of removing the breathing device from the case automatically activates the oxygen generation.
The red sealing bung and cap are connected inside the case via a black lanyard. If, for any reason the bungs
stay attached to the device when it has been removed, they should be removed manually before continuing
to don the set.
Once donned, try to remain calm and maintain a steady work rate to ensure regular breathing. Rapid
breathing uses more oxygen.
During use the starter and oxygen generator will increase in temperature. The oxygen provided will be
warm and dry and you may detect slight odours or tastes. These are normal conditions and indicate the
device is functioning correctly.