ELECTRIC DRILL - 2017/01
GENERAL INSTRUCTION
• Make sure that the ON/OFF button (7) on the power station is in OFF po-
sition.
• Turn the knob to change the speed of rotation (2) to „low”.
• Place the desired nail drill bit in the handle. Connect the handle to the
power station.
• If you want to control the rotation by a foot pedal (9), plug it into the
device (8).
• Connect the power cable to a power source (6).
• Set the ON/OFF button (7) in ON position. On the device lights up green
LED indicates readiness for work.
• After crossing on the “low” position, the device will start working.
• In the case of controlling the speed of rotation by the foot pedal (9), gra-
dually increase the pressure on the pedal.
SPECIFICATIONS
Size
L*W*H=115*150*80 mm
N.W.
1,386 kgs
Rotation Speed
0-35000 RPM
Adapter Input
220-240 VAC
Adapter Output
30 VDC
Power
65 W (max)
CHARACTERISTICS
• A simple nail drill bits system exchange.
• Efficient and quiet operation without vibration.
• Speed rotation regulated by knob or pedal.
• Four ends allowing for: leveling, shaping and polishing the nails and to
remove dead skins and old layers of gels and tips of the nails.
• The device also allows for precise engraving decorations on stylings.
SAFETY OPERATION INSTRUCTION AND WARNINGS
• Please start to use after the nail drill bit is well fixed.
• Please adjust the speed gradually, not abruptly.
• Please do not touch any rotating part while the device is working.
• When changing the direction, please stop the device first.
• Please do not place a cloth or anything else on the ventilation slides of
the device.
• Do not use the drill if the device or connection cable is visibly damaged.
• This equipment can be used by children at least 8 years of age and
3 EN
