E-4
SYSTEM BASICS
CONNECTION OF SPEAKER BOXES (WITH SUBWOOFER)
- Unwrap the speaker-cords of both speaker-boxes.
- Please notice that each speakers cord consists of 2 wires, one is “clear” and one has a
black line.
- Insert the “clear” wire of the left speaker-box into the “red” ( + ) speaker connector beside
the main-unit, which has the “L” indication (next to the speaker-connector).
- Insert the “black” wire of the left speaker-box into the “black” ( - ) speaker connector
beside the main-unit, which has the “L” indication (next to the speaker-connector).
- Repeat the above 2 steps for the “right” speaker box, but this time, inserting them into the
red & black connectors which have the “R” indication.
- When inserting each wire into a connector, press downwards on the connector’s plastic
knob (red or black part) & push the exposed metal end of the wire all the way into the
hole above this knob.
- Place the speaker boxes as far apart as possible for best sound effect.
SUBWOOFER - BASS LEVEL CONTROL
- The bass level can be adjusted by the bass level control at the rear of the subwoofer, you
can adjust it anytime as desired.
LIGHTCURRENT© WIRELESS AUDIO TECHNOLOGY
The lightcurrent© technology uses safe invisible infrared light to wirelessly transmit count.
But unlike normal infrared systems, this new technology, lightcurrent© functions much
like a light-bulb, doing away with the need for line-of-sight, covering a wide area range
and eliminating radio frequency Emissions/interference. The docking platform transmits
an uncompressed audio signal in all directions, which bounces off walls, ceilings, and
even furniture in your environment, eventually reaching (at the speed of light) the wireless
2.1 channel speaker system - providing the luxury of cordless, uncompressed, noise-free,
uninterrupted audio with unmatched sound quality.
