SEMAK CT450, Руководство по эксплуатации и гарантии

Страница: 7 / 14

Page | 7
Toast Feed Ramp
The toast feed ramp is installed at the factory and can be used in two positions.
1) When in the upright position, the toaster is set for automatic feed. Bread
products enter the toaster by placing them on the feed ramp and releasing.
2) For manual feeding of product, tip the feed ramp until it rests on top of the
unit. In this position bread products can be manually loaded by placing them
directly on the conveyor belt.
CAUTIONS

Some exterior surfaces on the unit will get hot. Use caution when touching
these areas to avoid injury.
Toast Crumb Tray
Install toast crumb tray directly below the conveyor belt and below the stop pins.
Insert until the front of the crumb tray meets the stop pins.
CAUTIONS

To avoid damage to the unit or injury to personnel always operate toaster with
crumb tray installed.

To avoid injury, do not remove the crumb tray for cleaning until toaster is cool.
Front / Rear Discharge
The toaster can be configured to discharge in the front or rear. User can pull up the
rear discharge door for front discharge and push down the rear discharge door for
rear discharge.
CAUTION

To avoid injury, do not remove the crumb tray for cleaning until toaster is cool.