SemaConnect 4 EV Series, Инструкция по установке и эксплуатации

Страница: 7 / 16

5
Wall Preparation
1. Locate and remove the top mounting screw from the charger using the supplied Allen wrench.
2. Remove the wall mount bracket from the charger by applying downward pressure on the wall mount
bracket until the charger mounting screws unseat from the wall mount bracket keyhole slots.
3. Store the charger and mounting screw in a safe place to avoid damage or loss.
4. At the selected location, mark the center of the stud and place the wall-mount bracket on the wall.
5. Using a level, ensure the wall-mount bracket is in an upright level position. Align center mounting holes with
the center of the stud and mark the wall-mounting screws holes.
6. Use mounting holes to secure the bracket to the wall using appropriate site-specific fasteners.