Operating Instructions - Counting Modes
Selection of the Counting Mode
There are two counting modes:
NORMAL
and
BATCH
. The
NORMAL
count mode is selected
automatically when there is no batch stop setting entered and shown on the Batch Setting Display. The
BATCH
mode is selected by entering any batch stop setting from 1 to 999 which is shown on the Batch Set-
ting Display. The optional batch stop setting is entered by pressing the desired numeric keys on the control
panel. In both modes, the counted number indicated on the Count Display will be reset to zero every time the
banknotes are removed from the stacker and a new group of banknotes are placed in the hopper (if the ma-
chine is not in
ADD
mode).
NORMAL Counting Mode
1) Place a stack of banknotes in the hopper and the optical sensor on the hopper plate will cause the machine
to start counting automatically.
2) The machine will continue to count until all the notes in the hopper have fed through and the counted
number is indicated on the Count Display.
3) The number displayed on the Count Display is cleared by removing the banknotes from the stacker and
placing the next group of banknotes in the hopper. The next counting operation will resume with zero on the
Count Display (if the machine is not in
ADD
mode).
4) Loading the hopper with additional banknotes without removing the previous banknotes stacked in the
stacker will cause the new counted number to be added to the previous total.
BATCH Counting Mode
1) Select any number from 1 to 999 on the Batch Setting Display by pressing the numeric keys on the control
panel. For example, to enter the batch stop setting “50”, press the number “5” key followed by the number
“0” key.
2) Place a stack of banknotes in the hopper. The machine will start counting automatically and will stop once
the counted number reaches the preset batch stop setting.
3) To repeat the batch counting with the same batch stop setting, simply remove the banknotes in the stacker
and the machine will continue to count out the banknotes in the batch size you entered.
4) To clear the batch stop setting, press the
0/C
button and the Batch Setting Display will return to zero.
ADD Mode
1) Adding in the
COUNT
mode is performed by pressing the
ADD
button (the indicator light will illuminate
to indicate the counter is in
ADD
mode). In this mode, r emoving the counted notes fr om the stacker and
placing a new stack in the hopper will not reset the counted number on the Count Display. Placing the next
group of banknotes in the hopper will cause the machine to start the next counting operation with the new
counted number added to the previous total.
2) The adding feature can also be utilized in
BATCH
mode in the same manner as described above by simply
selecting a batch stop setting when the
ADD
mode is activated.
8
