7
508.366.1488 | www.semshred.com
2.
Unpacking Instructions
The
Model 2SSD
has been secured to a pallet for shipping. Please inspect equipment immediately for any shipping
damage.
Important Note:
Prior to unpacking, if there is any visible damage to the Model 2SSD or to the crate during
shipping, the receiver must note what is damaged on the Bill of Lading and contact the shipping party
immediately.
Tools needed:
•
Lift truck with a minimum lifting capacity of approx. 2,500lbs. (crated unit weighs ~2,050lbs.).
•
Hammer
•
Pry bar
•
Strap cutters
Unpacking:
•
Remove sides of crate –
Hammer and pry bar
•
Cut straps holding Model 2SSD –
strap cutters
•
Remove the Model 2SSD from the pallet –
lift truck
Note:
It is recommended to lift the Model 2SSD from the front with the forks 30” apart or using the fork pockets
beneath the unit if ordered. Most of the weight will be on the right side of the Model 2SSD.
Casters:
The Model 2SSD is equipped with swivel casters for ease of handling after the unit is lifted off the pallet.
To transport the unit, unlock all caster locks and then the unit may be pushed on a flat straight surface.
Warning:
DO NOT push the unit on an inclined or declined surface as control of the unit can be lost and personal
injury could occur.
Storage:
If the unit requires storage, it may be stored in its shipping crate or unpackaged. If unpackaged, ensure
that the wheel caster locks are engaged to prevent unwanted movement of unit.
