USE OF THE REMOTE CONTROL BOX
Leaving from the position N of the control lever, to position in
forward gear you have to lift the retainer lever and to put the
control lever in position F.
The insertion of the gear is indicated by a release of the
movement. if the lever goes on in its travel, the accelerator
begins to operate. At the end of the travel of the lever there is the
maximum opening of the throttle valve.
To select the reverse gear you have to put the control lever in
position R . If, when the gear is selected, the lever goes on in its
travel, the acceleration phase begins
N Neutral position (neutral)
F Forward gear (forward)
R Reverse gear (reverse)
a Travel to select the forward gear
b Acceleration travel if forward gear is selected
c Travel to select reverse gear
d Acceleration travel if reverse gear is selected
Picture No. 51
The travel of the acceleration when the reverse gear
is selected is mechanically limited on the motor.
To avoid damages not to force on the control lever .
Accelerating when neutral gear is selected
To open the throttle when the neutral gear is selected (gear lever
in N position), you have to use the neutral gear lever and turn it
up.
Picture No. 52
Before selecting the gear you always have to
put the gas lever at the neutral position, in
repose position
(completely down)
.
The gas lever can be actionned only when the
control lever is in position N. The control lever can
be actionned only when the gas neural control lever
is at repose position (completely down).
The micro switch 8 prevents the motor from
starting when the gear is selected.
Even the manual starting models have a mechanical device
that prevents the starting when the gear is selected.
23
