SELF-GUARD SG-1000, Руководство пользователя

Страница: 32 / 116

32
Select “RECORD” with the direction buttons and then press [ENT]. Then it shows the
screen that’s being recorded as below, and the Self-Guard starts to record images.
When the Self-Guard goes into the “RECORD” mode, then the color of recording status
LAMP changes into red from green. When the Self-Guard detects a motion, then the
color turns into yellow. So if the Self-Guard continues to detect motions, the color
alternates between red and yellow.
This function saves images from the cameras, sounds from the microphones and data
from the sensors. Before you start to record, be sure to check from the LCD that the
camera can capture where you would like to record. In “RECORD” mode, even under
the situation of the battery and adaptor power outage, if the power from either of the
two gets available to the Self-Guard, then the Self-Guard automatically turns on its
power, and returns to the “RECORD” mode. This function is very useful for the users
who are in remote places from their Self-Guard, and not able to control it immediately
when they need to.
z REC AV: Indication of recording both A (Audio) and V (Video).
Shows “REC V” when recording the video only.
z C1: Camera channel number 1 being used for recording.
If it shows C1345, then ‘C’ indicates of camera and 1345 indicates
for camera channel numbers.
If it shows C1B123, then ‘C1’ indicates of camera number 1 and
‘B123’ indicates of Bluetooth channel 1, 2 and 3.
z
13:40:34: current time.
z (10): elapsed recording time (10 minutes).