IN0054
Revision
10
(005305)
–
4 of 7
POWER PERFORMANCE PASSION
Select.live
Quick Installation Guide
5.
Once the Select.live Setup Wizard is complete, wait approx. 30 seconds and then the following
display will appear on the Select.live display screen. Your Select.live is now ready to register for
the Select.live Portal using Device ID and Serial. Note: If Ethernet is selected, connect a network
cable from the Select.live to the modem or router after the Setup Wizard is completed.
6.
Note down the Device ID and Serial. This will be used for Select.live Portal registration.
Select.live Portal Registration
1.
Browse to the Select.live Portal (
http://select.live
) and c
lick on “Not register
ed
yet?”
. Complete the
form to register your account. A verification email will be sent to you. Follow the instructions to
activate the account.
2.
Log in to your account and register your Select.live
by clicking “Add a system”
.
3.
Enter the Select.live ID and Serial in the appropriate location as shown below.
--- REGISTRATION ----
Cloud:OK
IP :XXX.XXX.XXX.XXX
D.Ver:XX.XX.XX
Please Enter:
Device ID: XXXXXXXX
Serial: XXXXXX
in Select.live portal
