Timer on
indication will be displayed instead, denoting a vacant “on” time on No.1 programme.
2/ Set the required switching-on time using buttons “
h+
” and “
m+
”
3/ Set the day(s). See “
Day
” button selection (over) on which the switching-on command must be
executed.
4/ Push the button marked “
TIMER”
down once. This display indication will be displayed
… …
5/ Set the required switching-off time using button “
h+
” and “
m+
”.
6/ Set the day(s) on which the switching-off commands must be executed. (No day/s denotes every day.)
7/ Press button “
Timer
” to save the command.
When this
Timer on
indication appears you
can begin setting another switching-on command,
if you wish. Six such programmes may be stored in this manner.
After setting the required “on” and “off” times, press
to revert to present time.
Note: Be sure that: the desired day or days
are chosen on both the “on” and “off” displays.
F. “Day” button selections
Every day of the week
If you do not enter the day when setting a switching command, the switching will be carried out at the set
