SelectBlinds Dual E Series, Инструкция по установке

Страница: 8 / 12

WELCOME TO YOUR E-SERIES WINDOW COVERING
Setting Key
Button
LED Indicator
MICRO USB Plug
Wand
NOTE: Picture depicts underside
of the headrail
E-SERIES MOTOR NOTE:
The E-SERIES Motor can be found in
the headrail of your E-Series Window
Covering. Ensure that all connections
are connected prior to installation, this
will prevent future need to remove the
Window Covering from the installed
location.
WAKE YOUR E-SERIES WINDOW COVERING
Press, STOP/TILT for 2 seconds to wake your Window Covering.
PAGE 7
Setting Key
Button
Horizontal
Shade
SETTING KEY BUTTON NOTE:
The Setting Key Button can be found on the Motor inside the
headrail of your E-Series Window Covering and at the back of
the Motorized Wand (
reference figure 1
). A paper clip or rounded pointy
object can be used to troubleshoot the function of the Window
Covering.
If your Motorized Wand is attached, there is a small pinhole
Setting Key Button on the back just above the Micro USB port.
Use this in-place of the Setting Key Button in the headrail, as this
may be difficult to reach.
Figure 1
Setting Key
Button
Back of Motorized
Wand
The Setting Key Button needs to be released at the final specified jog
to allow for the Window Covering to beep in understanding of the
configuration requested.
Jog: 1 small movement from the motor indicating the device is configuring
Motori
zed W
and
UP
STOP
TILT
DOWN
USB
CHARGING
PORT
SETTING
KEY
BUTTON
NOTE: An orange light
indicates charging, a
green light indicates fully
charged and ready to use.
The Setting Key Button
needs to be released
at the final specified jog
to allow for the Window
Covering to beep in
understanding of the
configuration requested.
Jog: 1 small movement
from the motor indicating
the device is configuring
| Most setting requests
consist of 2 jogs