Cordless
Cellular
Fabric
Shade
Including
Top Down
/
Bottom-Up
&
Day / Night Shades
5
marks. Attach each bracket using the 1
1/8
” screws, pre-drill the
screw holes using a
3/32
” drill bit.
Step 4.
Attach Handle(s)
Attach the Handle to the bottom rail as illustrated. The handle is
designed to minimize contact with the shade fabric. Always raise
and lower the shade SLOWLY(!) to assure that the pleated fabric
stacks neatly.
Wider shades have (2) Handles – to precisely determine the correct
position for each handle, divide the total width of the shade by 4,
and then attach one handle that distance from each outside edge
of the shade – always grasp both handles when lifting and lowering
the shade.
For TDBU and Day/Night cordless shades, attach the 2nd handle to
the Middle Rail as illustrated.
Step 5.
How to Operate
IMPORTANT
Operating & Care Instructions for Cell Shades
READ CAREFULLY
• Make sure that the Handles have been attached to the
rail(s) as described above (see Step 4)
• To maintain optimal performance of the springs that make
your cordless shade function, lift and lower your shade
through its full range of motion – all the way up and down –
every day if possible.
• For shades with a single handle, which must be centered on
the rail(s), lift or lower the shade slowly and evenly, keeping
the rail(s) level, until the shade is positioned as desired.
• For wider shades with a double set of handles, grasp the
handles using both hands and lift the shade slowly and
evenly, being sure to keep the rail(s) level.
• If you have trouble lifting your cordless shade:
If the shade is left in one position for a long period of time, it
might be necessary to lift and lower the shade several times to
restore normal function.
If the shade has been fully raised for a long period of time, it
might tend to spring-back (rebound) slightly from the desired
TDBU
Single Cell
Double Cell &
Day/Night
