1.
We recommend that you use the charging cable supplied with your original product.
2.
Plug the USB port of the charging cable into the USB 5V output port.
3.
Connect the mobile charging adaptor to your phone, or other similar device.
4.
Press the power switch, and the charging will start.
This unit can be charged using either a 12V AC adaptor (12V/1A), or a Micro USB (5V/1A):
● Do not attempt to charge the unit using both methods at the same time. This will damage the unit.
● When recharging using AC power, only use the 12V AC adaptor supplied with this unit.
Using the 12V AC adaptor, it will take approximately 5 hours to fully charge the unit. To extend the
battery life, it is recommended to fully charge the unit every 3 – 6 months. Once the unit is fully
charged, or is not under load, it will enter an auto sleeping mode to save power. However, we
recommend turning off the unit when it is not in use.
Press the POWER switch to turn on the white LED light. Further holding down the Power switch
will cycle between SOS and Flashing modes.
Battery Capacity
12000mAh
Cycle Life
>300 times
EC5 Output
8-12V /600A(max) Peak Cranking Power
USB Output
USB:5V/2.1A(max)
DC Charging Input
DC :12V/1A
Micro USB:5V/1A
Charging Time
DC 12V: ~4-5h (12V @ 1A charging current)
Micro USB: ~9-10h (5V @1A charging current)
LED Light Power
White:1W
Working Temperature
-20
℃
-60
℃
Storage Temperature
-20
℃
-60
℃
Net Weight
400g
Unit Size (LxWxH)
167x72x38 mm
How To Charge Mobile Phone?
How To Recharge This Unit?
How To Use The LED Lights?
Specifications
