MANUAL DE INSTRUCCIONES CODIGO 80044 REV D Enero/2020 (Sujetas a modificaciones sin previo aviso) Pag.: 10
J
.P. SELECTA s.a.u.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
e-mail: [email protected] - http://www.jpselecta.es
STARTING UP:
1. Connect into mains.
2. Put the tubes into the head in a balance way. If all buckets
are not used, take notice that the load must be symmetrically
balanced.
3. Close the cover.
4. Select the speed. (r.p.m.):
1000, 1500, 2000, 2500, 3000, 3500, 4000.
5. Select the centrifugation time (hh.mm).
6. Press
On / Off
to start centrifugation.
STOP:
Press
On / Off
and wait for a few minutes before opening the door.
Do not place tubes and remove if the head is not completely
stopped.
Leave the head to stop by itself. Do not use any tool or your hand
to brake the head.
SAFETY:
There is a microswitch which disconnects the motor when opening
the cover (in case of stop omission of the motor)
CAUTION!! DO NOT OPEN THE COVER WHEN THE MOTOR
IS OPERATING
7. MAINTENANCE
Before removing the cover, disconnect the equipment from
the mains.
CLEANING:
For the cleaning of the different parts, use the following products:
Cleaning of casing, plastic and painted metals: Alcohol with cotton
duster.
8. GUARANTEE
This product is guaranteed for one year. The guarantee does not
cover damages caused by an incorrect use or causes beyond the
control of J.P. SELECTA, s.a.u.
Any manipulation of the equipment by unauthorized personnel by
J.P. SELECTA, s.a.u. cancels the guarantee automatically.
