INSTRUCTION MANUAL CODE 80148 REV C
04/2020
Page: 12
J
.P. SELECTA s.a.u. Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62 e-mail: [email protected] - website: www.jpselecta.es
2. Connection for regulator “SENSOTERM II” (1001009)
• Put the probe submerged into the liquid. Connect the probe in the
stirrer rear part plug.
• Set the temperature on the «SENSOTERM II».
• Set the power rate or temperature on the stirrer at maximum.
LIQUID’S TEMPERATURE CONTROL
1. Connection to work without external connection of a tempera-
ture control device.
This configuration is the default one.
3. Connection for Pt100 probe (1001610)
ATTENTION: for safety reasons, the temperature regulation by
the external probe is limited from 50 to 200ºC.
• Put the probe submerged in the liquid. Connect the probe in the
stirrer rear part plug.
• Set the temperature on the stirrer control panel.
MAINTENANCE
The guarantee will not have any effect if the electronic circuit
boards are manipulated by personnel not expressly authorized
by J.P. SELECTA, s.a.u.
CLEANING:
For the cleaning of the different parts use the following products:
Cleaning of stainless steel: Alcohol
Cleaning of control panel and ceramic plate: Alcohol with cotton duster.
SPARE PARTS
To guarantee the safety of the equipment, all spare parts must
be purchased from J.P.SELECTA, s.a.u.
WARRANTY
This product is guaranteed for one year. The guarantee does not cover
damages caused by an incorrect use or causes beyond the control
of J.P. SELECTA, s.a.u.
Any manipulation of the equipment by personnel not authorized by
J.P. SELECTA,s.a.u. automatically cancels the guarantee.
DESCRIPTION
CODE
Main
Board
0038511
Display
Board
0038512
Motor
0024283
Heating
Element
(ED-C)
0039248
Ceramic
Disc
(ED-C)
0032048
Heater
Plate
(ED)
0039221
Probe
0043028
“SENSOTERM II ”
