INSTRUCTION MANUAL
CODE 80307 REV A
01/2022
Page: 16
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.grupo-selecta.com
7.2.1 Set time and date
Press on the time/date icon. Press successively on the box to select the day,
month, year, minute & second adjustment.
Adjust by pressing on the icons Increase and Decrease.
7.2.2 Set parameters of temperature control and
«Autotuning»
For an optimal use of the furnace, P, I, D parameters of temperature control
should be the appropriate value.
With a value of the appropriate P, I, D parameters, the furnace will reach
the temperature in the shortest possible time and without exceeding the set
temperature. However, those values can be quite different at high and low
temperatures.
The furnace comes with the following values: P=10; I=100; D=25 which are
appropriate for most jobs.
These values can be modified, but it’s advisable to perform an «Autotuning»
when you need a better accuracy.
The «Autotuning» automatically adjusts the optimal parameters for a given
temperature and a load.
Press on the PID/Autotuning icon. Press successively on the box to select the
P, I, D values adjustment and modify the value by pressing on the Increase
and Decrease icons.
Attention
: It is not recommended to change these parameters. Use the
«
Autotuning
» option to automatically adjust these values.
Press on the PID/Autotuning icon.
Select the «Autotuning» temperature with:
(for example, the temperature most used)
Start «Autotuning» by pressing on the icon:
If for some reason you want to stop, press on:
7.2 SETTING screen
Icons meaning:
Time/Date
PID/Autotuning
Comunication
Alarms and temp. offset
Temperature units
Language (Spanish, English,
French)
Reject change
Validate change
Up/Down
ºC/ºF
