Wiring instructions:
Red = + 12-24 VDC or 12-24 VAC
Black: - 12-24 VDC or 12-24 VAC
White: Normally closed relay contact
Brown: Common relay contact
Green: Normally open relay contact
Optional:
15’ Antenna extender cable may be added to SPRFC1
Programming SPRFC1:
TO ENTER PROGRAMMING:
1) Press * & 0 keys at same time.
2) Key in 4 digit pass code
(Factory default = 7777)
3) Press *
4) For correct pass code display will show:
* OR SEL. FUNCTION
5) Press * to step through menu choices.
SPRFC1 Programming menu choices:
1) Add Xmit (Add transmitter code number)
Key in 5-digit code between 00001—65535
Press * to confirm.
2) Bulk Load (Allows range of code numbers to be entered)
Key in starting 5 digits and press *
Key in ending 5 digits and press *
3) Pin Length
Will only accept digits 0, 3, 4 or 5. If a 1 or a 2 is entered as the pin length,
the system will force it to a “3”. Programming a pin length of “0” will turn OFF
the pin function. PIN codes are treated the same as Xmitter codes.
4) Relay On Time
½ second or 1—9 seconds (Factory Default = 1)
Press 1 –9 for seconds desired and *
Press 0 and * for ½ second
5) Password
To change passcode, key in all 4 digits and press *
