North America
Version 4: September 2010
© Selecon
All Rights Reserved
RAMA FRESNEL & PC RANGE
OPERATION MANUAL
THANK YOU FOR PURCHASING A SELECON FIXTURE. WE HAVE DESIGNED THIS FIXTURE TO PROVIDE
YOU WITH A SUPERIOR FITTING IN PERFORMANCE, DESIGN AND ENGINEERING. WE ARE CONFIDENT
THAT IT WILL PERFORM TO YOUR EXPECTATIONS FOR MANY YEARS TO COME.
IMPORTANT NOTE
:
Before discarding the packaging ensure you have the suspension bolt set, color frame, lamp base spacers
&/or the lamp.
Before operating your new luminaire please read this information to assist you in making maximum use of
your luminaire, its maintenance and care. If you would like further assistance contact your Selecon dealer
or Selecon.
LAMPING YOUR FIXTURE
Before lamping
– DISCONNECT THE FIXTURE FROM THE POWER SUPPLY. Be aware also that the lamp,
fixture or integrated safety bond may still be hot, so exercise the necessary caution to avoid burns. Please
note also that these fixtures are not suitable for mounting on a normally flammable surface.
The Selecon Rama Fresnel and PC range comprises four models: the
High Performance
7” Fresnel, High
Performance
7” PC, 6” Fresnel and 6” PC
.
Selecon Rama Fresnel and PC with P28 Lamp Base
The Selecon Rama range with P28 lamp base is designed for use with either the BTN 750W or BTR 1000W lamp.
Selecon Rama Fresnel and PC with G22 Lamp Base
The Selecon Rama range with G22 lamp base is designed for use with the EGT 750W 1000W lamp.
To relamp:
Release the clip fastener and swing down the door.
Insert lamp taking care not to touch the quartz envelope with your fingers.
Close door and lock off the fastener.
The fixture should be at least 5ft away from the nearest object it is
lighting.