Selecline 600081562, Руководство пользователя

Страница: 18 / 139

6/ CLEANING AND CARE
WARNING! Before performing any maintenance on the appliance, switch off the
appliance and disconnect the mains plug from the mains socket.
IMPORTANT! Any electrical work required during the servicing of the appliance
should be carried out by a qualified electrician or competent person.
IMPORTANT! This product must be serviced by an authorized Service Center and
only genuine spare parts may be used.
CLEANING
For hygienic reasons, the appliance interior, including the interior accessories, need
to be cleaned regularly.
Caution! Do not clean the appliance while it is connected to the mains. There
is the danger of electrical shock! Before cleaning, switch off the appliance and
unplug it from the mains. Alternatively, switch off the circuit breaker or remove the
fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate
in electrical components presenting a danger of electrical shock! Hot vapors
can damage the plastic components of the appliance. The appliance must be
completely dry before it is placed back in service.
Important! Ethereal oils and organic solvents can damage plastic parts. Do not
use additives such as lemon juice or the juice from orange peel, butyric acid, or a
cleanser that contains acetic acid. Do not use any abrasive cleansers.
Do not use metal objects to clean the appliance.
Regularly examine the drain in the refrigerator compartment for defrosted water. If
necessary, clean the drain. If the drain is blocked, water will collect in the bottom of
the appliance.
1. Remove the food from the appliance and store it in a cool, dry place.
2. Switch the appliance off and remove the plug from the mains. Alternatively,
switch off the circuit breaker or unscrew the fuse.
3. Clean the appliance and the interior accessories with a cloth and lukewarm
water. After cleaning, wipe down with a clean, dry cloth until the interior is dry.
4. After everything is dry, put the appliance back into service.
REPLACING THE LAMB BULB
Caution! Before replacing the bulb in the lamp, unplug the appliance.
The correct bulb specification is listed on the appliance rating label.
1. Turn off the appliance, turn the temperature regulation knob to number 0.
2. Unplug the appliance. For safety, make sure the appliance is disconnected from
the mains.
3. Remove the screw from the lamp cover.
4. Pull the lamp cover out. See Figure 15.
5. Unscrew the bulb.
6. Screw in a fresh bulb.
7. Replace the cover and screw it into place.
8. Plug in the appliance and set the temperature regulation knob to the proper
number.
17