Selden Furlex 404S, Руководство и список запасных частей

Страница: 6 / 40

6
FL
1100 mm
CB
E
F
Furlex type 404S
Head deduction F
630
(24 51/64”)
Tack deduction E
(Any additional toggle or link
must be added to E)
Ø 12: 390 (15 23/64”)
Ø 14: 410 (16 9/64”)
Cutback CB 80 (3 5/32”)
Internal diameter of luff groove
DLG
Ø 8
(5/16”)
Width of luff groove WLG 3.0 (1/8”)
Overall luff extrusion
dimensions
52 x 38
(2 3/64” x 1 1/2”)
Your sailmaker has all the necessary sailmaker information through the Seldén Sailmakers Guide.
The Sailmakers Guide can be downloaded from www.seldenmast.com
Note that if you want to use an existing sail, it will need some modifications:.
• The luff length needs to be adjusted.
• A luff tape is required. The luff tape must be compatible with the Furlex luff extrusion geometry.
• Use webbing loops at the sail head and tack instead of grommets (cringles). The sail will then form tightly
round the luff extrusion when furling, and achieve a better shape when reefed.
1.5 Sail information
Fig. 1.5.a
Fig. 1.5.c
It is most important that the halyard swivel is located so that the halyard satisfies the 15–20°
angle requirement. If the sail prevents the swivel from reaching the correct position, the luff
length needs to be adjusted:
IF THE SAIL IS TOO LONG: Shorten the sail, e.g. in conjunction with changing to a luff
tape compatible with Furlex.
IF THE SAIL IS TOO SHORT: Lengthen the sail by means of a HMPE or wire pendant
fitted to the head of the sail. Attach the pendant directly to the sail to prevent unintentional
removal, loss or exchange.
Fig. 1.5.b
WLG
DLG
Max sailspace FL
-(F+E)