Selden Furlex 104S, Руководство и список запасных частей

Страница: 5 / 40

5
15-20°
The information in this manual must be followed carefully to avoid damage
to the system and to aviod the risk of personal injury. The warranty is only
valid if the system is assembled and operated according to this manual.
Please read the entire manual before assembly!
• Be very careful when you open the wire coil! It may spring open and
cause damage and/or personal injury.
• Never use a snap shackle to secure the standing rigging, not even tempo-
rarily. When installing the system on a rigged boat, always use a strong
screw pin shackle or tie the spinnaker halyard to a strong point on the boat
before removing the existing forestay.
• Incorrect halyard routing can result in ”halyard wrap” which may cause
severe damage to the forestay, and put the entire rig at risk. The angle
between the halyard and the forestay must never be less than 15°. In-
correct halyard routing can also cause the halyard shackle to wear against
the luff extrusion.
• If using a winch for the furling line, first check that there is no obstruction
which may interrupt the furling operation and possibly cause damage.
• Take care to ensure that all split pins are secured properly after installa-
tion.
1.4 Safety precautions
Fig. 1.3.c Fig. 1.3.b
Fig. 1.3.d
Fig. 1.3.a
May lead to
Incorrect halyard routing can result in ”halyard wrap” which may cause severe damage to
the forestay, and put the entire rig at risk. The angle between the halyard and the forestay
must never be less than 15°!