Selco EB 70, Руководство пользователя машины

Страница: 59 / 94

BIESSE S.p.A. Woodworking Machinery
(l138h009.fm-141101)
&KDSWHU
5HSODFHPHQWVDQG$GMXVWPHQWV
9. Loosen slightly the screws which hold in
place the belt tightener
- .
10. Replace the cutting blade belt . with a new
one.
11. Vary the position of the belt tightener -LQ
RUGHUWRWHQVLRQWKHFXWWLQJEODGHEHOW. .
To obtain the precise belt tension, it is
recommended to adopt the methods
described in the paragraph
“Measuring the
Blade Belts Tension” on page 8 - 6 .
12. In order to remove the scoring blade belt
/
,
disassemble the cover
0
located on the
back of the base and access the rear part
of the operating section (after having
moved it manually).
13. Loosen slightly the screws which lock the
motor
1
.
14. Adjust screws
2
and
3
to lift the motor
1
at
such a height as to be able to remove the
belt
/
.
15. Move to the front part of the operating
section and replace the belt
/
with a new
one.
16. Adjust screws
2
and
3
to tension the
scoring blade belt
/
. In order to obtain the
precise belt tension, it is recommended to
adopt the methods described in the
paragraph
“Measuring the Blade Belts
Tension” on page 8 - 6 .
17. When tensioning has been completed,
tighten the motor locking screws and
reassemble all hardware.
-
.
/
0
2
3
1