6
SEL-734W and SEL-WCS
Information Sheet
Date Code 20191014
Product Overview
SEL-WCS Installation
Install the SEL-WCS on a distribution line by using an industry-standard shotgun
stick.
Step 1. Use a shotgun stick to grasp the hook eye on the side of the SEL-WCS
and place the device on the line so that the opening hangs over the line.
Step 2. Apply slight downward and sideways pressure until the device is
closed around the line. The spring mechanism should be pushed in so
that it wraps around the line.
Step 3. Apply slight upward pressure until the device is secured around the
.
Step 4. Use the shotgun stick to adjust the transmitter orientation so that it is
directly vertical. This is important to ensure the best propagation
characteristics for the internal antenna.
SEL-734W Installation
The SEL-734W cabinet is made to mount to a four-jaw meter mount socket.
Refer to the SEL-734B literature on selinc.com for instructions on mounting this unit.
Figure 5
Figure 6
Figure 7
