Schweitzer Engineering Laboratories, Inc.
SEL-2725 Data Sheet
7
General Safety Notes
The SEL-2725 is designed for restricted access locations.
Equipment is intended for permanent installation indoors
and inside an electrical/fire enclosure. Access should be
limited to qualified service personnel. To ensure proper
safety and operation, check the equipment rating, instal-
lation instructions, and operating instructions before
commissioning or maintaining the equipment. Keep it in
the box until ready for installation. Also check the integ-
rity of any protective conductor connection before taking
any other actions. It is the responsibility of the user to
ensure that the equipment is installed, operated, and used
for its intended function and in the manner this manual
specifies. The equipment should not be serviced. If this
equipment is used for anything other than its intended
function or in a manner this manual does not specify, any
safety protection the equipment provides may be
impaired. Positive or negative of the station battery
inputs can be externally connected to the case ground, or
other common ground, without damage.
Technical Support
We appreciate your interest in SEL products and services. If you have questions or comments, please contact us at:
Schweitzer Engineering Laboratories, Inc.
2350 NE Hopkins Court
Pullman, WA 99163-5603 U.S.A.
Tel: +1.509.338.3838
Fax: +1.509.332.7990
Internet: selinc.com/support
Email: [email protected]
