SEL-2505 Remote I/O Module
Date Code 20010214
SCHWEITZER ENGINEERING LABORATORIES
2350 NE Hopkins Court • Pullman, WA 99163-5603 • USA
Phone: (509) 332-1890 • Fax: (509) 332-7990
Internet: www.selinc.com • E-mail: [email protected]
!
CAUTION:
The module contains devices sensitive
to Electrostatic Discharge (ESD). When working on the
module with the front panel removed, work surfaces
and personnel must be properly grounded or
equipment damage may result.
!
CAUTION:
Removal of enclosure panels exposes
circuitry which may cause electrical shock which can
result in injury or death.
!
DANGER:
Contact with instrument terminals may
cause electrical shock which can result in injury or death.
!
DANGER:
Contact with this circuitry may cause
electrical shock that can result in injury or death.
Schweitzer Engineering Laboratories, SEL
OGIC
, Connectorized, Job Done, SEL-PROFILE, and
are
registered trademarks of Schweitzer Engineering Laboratories. All brand or product names appearing
in this document are the trademark or registered trademark of their respective holders. U.S. and For-
eign Patents Pending.
The software (firmware), schematic drawings, module commands, and module messages are copyright
protected by the United States Copyright Law and International Treaty provisions. All rights are
reserved. You may not copy, alter, disassemble, or reverse-engineer the software. You may not provide
the software to any third party.
The information in this manual is furnished for informational use only and is subject to change without
notice. The English language manual is the only approved SEL manual.
ã
2000, 2001 Schweitzer Engineering Laboratories. All rights reserved.
!
ATTENTION:
Le module contient des pièces
sensibles aux décharges électrostatiques. Quand on
travaille sur le module avec les panneaux avant ou du
dessus enlevés, toutes les surfaces et le personnel
doivent être mis à la terre convenablement pour éviter
les dommages à l’équipement.
!
ATTENTION:
Le retrait des panneaux du boîtier
expose le circuit qui peut causer des chocos électriques
pouvant entraîner des blessures ou la mort.
!
DANGER:
Tout contact avec les bornes de
raccordement de l’appareil peut causer un choc
électrique pouvant entraîner des blessures ou la mort
.
DANGER:
Tout contact avec ce circuit peut être
la cause d’un choc électrique pouvant entraîner des
blessuers ou la mort.
!
Notes
