4
© 2011–2018 by Schweitzer Engineering Laboratories, Inc. All rights reserved.
All brand or product names appearing in this document are the trademark or registered
trademark of their respective holders. No SEL trademarks may be used without written
permission. SEL products appearing in this document may be covered by U.S. and Foreign
patents.
Schweitzer Engineering Laboratories, Inc. reserves all rights and benefits afforded under
federal and international copyright and patent laws in its products, including without lim-
itation software, firmware, and documentation.
The information in this document is provided for informational use only and is subject to
change without notice. Schweitzer Engineering Laboratories, Inc. has approved only the
English language document.
This product is covered by the standard SEL 10-year warranty. For warranty details, visit
selinc.com or contact your customer service representative.
EtherCAT
®
is registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
*PDS2243-01*
2350 NE Hopkins Court • Pullman, WA 99163-5603 U.S.A.
Tel: +1.509.332.1890 • Fax: +1.509.332.7990
selinc.com • [email protected]
SEL-2243 Data Sheet
Date Code 20180629
Redundant Installation
Each node may have one or two SEL-2243 modules installed. When
two are used, they operate in load sharing mode.
Type Tests
Communication Product Testing
IEEE 1613-2009 + A1-2011 Performance Class 1
Environmental Tests
Enclosure Protection:
IEC 60529:2001 + CRGD:2003
IP3X excluding the terminal blocks
Vibration Resistance:
IEC 60255-21-1:1988
Vibration Endurance, Severity: Class 2
Vibration Response, Severity: Class 1
Shock Resistance:
IEC 60255-21-2:1988
Bump Test, Severity: Class 1
Shock Withstand, Severity: Class 1
Shock Response, Severity: Class 1
Seismic:
IEC 60255-21-3:1993
Quake Response, Severity: Class 1
Cold:
IEC 60068-2-1:2007
–40°C, 16 hours
Dry Heat:
IEC 60068-2-2:2007
+85°C, 16 hours
Damp Heat, Cyclic:
IEC 60068-2-30:2005
25°C to 55°C, 6 cycles,
95% relative humidity
Dielectric Strength and Impulse Tests
Impulse:
IEC 60255-5:2000
Severity Level: 0.5 Joule, 5 kV
IEEE C37.90-2005
Severity Level: 0.5 Joule, 5 kV
Dielectric (HiPot):
IEC 60255-5:2000
Severity Level: 3100 Vdc on power
supply for 1 minute
IEEE C37.90-2005
Severity Level: 3100 Vdc on power
supply for 1 minute
Insulation:
IEC 60255-5:2000
Severity Level: 500 V for greater than
1 minute
RFI and Interference Tests
EMC Immunity
Electrostatic Discharge
Immunity:
IEEE C37.90.3-2001
IEC 60255-22-2:2008
IEC 61000-4-2:2008
Severity Level: 4
8 kV contact discharge
15 kV air discharge
Radiated RF Immunity:
IEEE C37.90.2-2004
Severity Level: 35 V/m
IEC 61000-4-3:2010
Severity Level: 10 V/m
IEC 60255-22-3:2007
Severity Level: 10 V/m
Digital Radio Telephone
RF Immunity:
ENV 50204:1995 Severity Level: 10 V/m
at 900 MHz and 1.89 GHz
Conducted RF Immunity: IEC 60255-22-6:2001
Severity Level: 10 Vrms
IEC 61000-4-6:2008
Severity Level: 10 Vrms
Surge Immunity:
IEC 60255-22-5:2008
Severity Level: 1 kV Line to Line,
2 kV Line-to-Earth
IEC 61000-4-5:2005
Severity Level: 1 kV Line to Line,
2 kV Line-to-Earth
Fast Transient, Burst
Immunity:
IEC 60255-22-4:2008
Severity Level: Class A: 4 kV, 5 kHz;
2 kV, 5 kHz on communications ports
IEC 61000-4-4:2011
Severity Level: 4 kV, 5 kHz
Power Supply Immunity: IEC 61000-4-11:2004
IEC 61000-4-29:2000
IEC 60255-11:2008
Magnetic Field
Immunity:
IEC 61000-4-8:2009
Severity Level: 1000 A/m for 3 seconds,
100 A/m for 1 minute
IEC 61000-4-10:2001
Severity Level: 100 A/m
Surge Withstand
Capability Immunity:
IEEE C37.90.1-2002,
2.5 kV oscillatory, 4 kV fast transient
IEC 60255-22-1:2007
2.5 kV common-mode
1.0 kV differential-mode (cable length
< 2 m for RJ45 power couplers)
Oscillatory Waves
Immunity:
IEC 61000-4-12:2006
Ring Wave: 2 kV common,
1.0 kV differential
Oscillatory: 2.5 kV common,
1.0 kV differential
Common Mode
Disturbance Immunity:
IEC 61000-4-16:2002
Frequency: 0 to 150 Hz
Severity: Level 4, segment 4: 30 Vrms
open-circuit, 15 to 150 kHz
Emissions
Radiated and Conducted
Emissions:
IEC 60255-25:2000