background image

1. Warranty and warnings 

AvMap Srl 

warrants every unit to be free from defects in material and workmanship under normal 

use and service for a period of 24 months from original retail purchase. During the warranty period, 

AvMap Srl 

will repair or replace any component which fails in normal use without charges for parts 

or labour. Technological developments, modifications and upgrades of software are not covered by 

warranty.  To receive warranty service, contact your local authorized dealer for shipping instructions. 

The device should be securely packed with its tracking code clearly written on the outside of the 

package, shipping to be paid by the customer. Include a copy of the original sales receipt as the 

proof of purchase. This limited warranty does not extend to any device which has been subjected to 

misuse, neglect, accident, incorrect wiring or improper installation. 

AvMap Srl 

reserves the right to 

repair or replace the device at its sole discretion. 

For more warranty information please see the web site: www.seiwadirect.com 

For technical advice or assistance in Europe contact:

AvMap Srl

Viale Zaccagna 6, 54033 Carrara (MS), Italy

Customer support: +39-0585-784044

[email protected]

Electronic charts displayed by the device are believed to be accurate and reliable, but they 

are not intended to replace official charts which should remain your main reference for all the 

matters related to the execution of safe navigation. For this reason we would like to remind 

you that you are required to carry on board and use the officially published and approved 

nautical charts.
Please be aware that the serial ports are not opto-isolated and therefore the peripherals are  

electrically connected to the device. This allows the connection of high speed peripherals, 

like Fish Finder. If you are connecting a NMEA0183 peripheral and you would like to isolate 

it from the device, you have to add the opto-isolator externally.
If 

water leaks into the equipment, immediately turn off the 

power at the switchboard. Fire or 

electrical shock can result.

If the equipment is giving off smoke or fire, immediately turn off the 

power at the switchboard. 

Fire or electrical shock can result.
Do not open the equipment. The equipment uses high voltage that can cause electrical 

shock.
Keep the SD card slot’s door closed to avoid water intrusion into the device

Extensive exposure to heat may result in damage to the device.

Please read through the device manual before the first operation. If you have any questions, 

please contact the Company’s customer service or your local dealer.
C-MAP media is available from C-MAP Authorized Resellers.

Содержание SWx 900









Отзывы: