1) Don't remove the filter (vent filter) and cable connector.
2) In the period when the product is in use, never disassemble it.
3) For disposal of the product, follow the regulations and rules of your local government.
When reordering, please let us know:
・
Drawing or drawing No. for the delivered product
・
Manufacturing lot number on the nameplate
1.
2. The supply voltage variation should be within ±6% of the rating.
3. Mount the product on a solid structure.
4.
Mount the product on a flat surface. Don’t use the product with stress on it.
5.
6.
7. If the product is to be installed vertically, mount it with its cable side down.
8. Confirm that the fitting is adequately grounded.
9.
10. The color of the cover may turn yellow due to direct sunlight (ultraviolet rays).
11. To avoid noise or malfunctioning, don't use a radio, television or wireless infrared remote control near the fitting.
12.
13. The LED lamp and the power supply unit cannot be replaced.
14.
15.
The ambient temperature should be within the range of -20°Cto +40°C. The use of the product out of this range may shorten the service
life.
Connect the power and grounding wires securely and waterproof them. The waterproof treatment should be adequate to prevent water
penetration into the cable.
The product may be installed indoors or under the eaves. Don
’
t use the product in a place exposed to direct sunlight. The use in such a
place might cause an electric shock, deterioration of the product, damage to the product, or shortened service life.
Reordering
For white LED lamps, the luminescent color and brightness may vary with individual LEDs because of their nature. Also note that the rate
of attenuation with time varies with individual LED lamps.
For use in an unfavorable location (a place in which there is strong wind or vibration, a salt damage environment or a dusty or corrosive
gas atmosphere), a special countermeasure should be taken.
The product should not be used in an environment in which the temperature and humidity are always high, such as a bathroom for
business or sauna.
If the above information is unavailable, give us any material showing
the appearance of the product or details of the product specification
(dimensions, mounting interval, lamp type, etc.).
Disassembly and Disposal
Be careful not to stain the cover with an organic solvent, oil or the like. Don
’
t use the product in an alkaline atmosphere to avoid cracking
or discoloration. The cover may be damaged by the following substances: alkaline substances, benzene, toluene, gasoline, acetone,
organic solvents such as aromatic and chlorinated hydrocarbons.
CAUTIONS
Nameplate
- -
