Thank you very much for purchasing our LED lighting fittings.
Please read this instruction manual to use the product properly.
1) Prior to installing the fitting, check if the product is as per your order.
2) Check for a loose or damaged part due to an accident in transit, etc.
1) Confirm dimensions A, B, and C in the table below and install the fitting securely according to the dimensions.
NB: If the fitting is to be installed vertically, mount it with its cable side down.
2)
NB: Connect the power and grounding wires securely and waterproof the wires.
The waterproof treatment should be adequate to prevent water penetration into the cable.
The LED lamp is turned on by applying the rated voltage to the power cable of the product.
■
Inspection
1)
2) Prior to maintenance, be sure to turn off the power.
3) Carry out maintenance properly in accordance with the related law and regulations.
4) If a repair is needed, consult us.
How to Use
Maintenance
Input Voltage
(Frequency)
100-242V AC
(50/60Hz)
Power
Consumption
29W
59.5-57.0W
Model
In cleaning the fitting, gently wipe with water or mild detergent. Don
’
t use thinner, benzene or alkaline detergent. Such
chemicals might cause discoloration or deterioration in quality and strength, resulting in a damage.
Vapor proof and Weather proof type LED Lighting Fittings
IP
rating
LYWA2602101
1087mm
Source of light
IP55
6 holes in total
Dimension A
Dimension C
40mm
White LED
(26W)
0.30-0.13A
0.67-0.25A
714mm
Prior to use
LYWA
After installing the product, be sure to hand this manual over to the user of the product.
Performance
11E0001038A11
To be conserved
Instruction Manual
Input
Current
LYWA2601101
LYWA2602101
Installation
Use the power cable from the fitting for electric connection. The black and white wires are power wires and the green wire is a grounding wire.
LYWA2601101
12×8(4 long holes)
20×12(2 long holes)
Dimension B
684mm
Model
Mounting Holes
Fitting installed
1057mm
4-12
×
8
Long hole for mounting
2-20
×
12
Long hole for
- -
