Seitron AACE01, Использование и обслуживание

Страница: 8 / 20

8
4.0 TECHNICAL FEATURES
4.1 technical features
Power supply: 110-240 Vac or
12-16Vdc 5A
Power absorption: < 50 W
Drying gas method: water is condensed by rapidly cooling
down the gas using a cyclonic system (vortex)
Method of condensate separation: Peltier unit
Set point temperature: +5°C
Temperatura di Isteresi: ±2°C
autom. condensate drain : peristaltic pump 38ml/min
Duration of peristaltic pump cycle: 30s on - 600s off
Cooling down time: ~ 15 .. 20 minutes
Working temperature: -5°C to +45°C
Working flow
:
up to 2,5 l/min
Volume exchange per hour: 120ml/h
Maximum temp. deviation from set point: +5°C from set point
4.2 Green LED behavior
4.3 Electrical connections

Power plug at 110-240Vac through IEC 320 with fuse-holder socket containing 2 protection fuses size
5x20mm 4A retarded.

Power plug at 12-16Vdc through DC connector 5,5 x 2,1, that allows to power the device in low voltage, also
through a “car battery starter” at 12Vdc.
4.4 Pneumatic connections

Non-condensed gas inlet connector input

Condensed gas output connector

Water drain outlet connector
Slow blinking System cool down phase
Still lit System OK; the Cooler has reached the operating temperature of +5 °C
Fast blinking Error in temperature measurement