SeismicAudioSpeakers.com
Facebook.com/SeismicAudio
Twitter.com/SeismicAudio
1-877-347-6423
Page 10
Connection Example 2
Standard 3-Pin XLR Microphone Cables (Male to Female)
Daisy Chaining Signal from one PWS Amp to another PWS Amp
This example shows how to connect two PWS-15 or PWS-12 speakers to a standard Mixer using one MAIN OUT jack
on your mixer. By choosing this method, it will free up one main out jack on the mixing board and allow the PWS
speakers to be Daisy Chained. This application requires (2) XLR 3 pin male to female cables. Seismic Audio offers
these cables. The model number is: SAXLX-25.
To start, take the female end of the first cable and insert it into the output jack labeled
MAIN OUT LEFT
on your
mixing board. Then insert the male end of the cable into the XLR input of the first or left PWS speaker. Second,
insert the female end of the second XLR cable into the XLR output jack of the first PWS. Lastly, insert male end of
the XLR cable into the XLR input jack on the second PWS speaker.
