10
SEIKOM-Electronic GmbH & Co. KG
Fortunastr.20
D-42489 Wülfrath
Telefon: +49(0) 20 58/20 44
Fax: +49(0) 20 58 / 79 111
E-Mail:
Internet:
http://www.seikom-electronic.de
LED indication
The green LED is lit when the power supply has been connected correctly and flashes when the
actual pressure is above or below the selected measuring range. The yellow LED is lit if pressure
exceeds 50 Pa and flashes for approx. 3 seconds during zeroing.
LED
On
Flashing
Off
Green
OK
Pressure outside set range
No supply
Yellow
>50Pa
Zeroing in progress
<50Pa
Connection and commissioning must be performed by properly authorized and qualified
personnel! Connection to mains supply (L, N) must be made by means of a protected isolating
switch with the usual fuses. As a matter of principle, the General VDE Regulations must be
complied with (VDE 0100, VDE 0113, VDE 0160). In case of wrong connection none warranty
and liability claims.
Figure 1
Dimensioned sketch
