13
TECHNICAL GUIDE
3) Place the solar cell unit at a distance of 5 cm under a fluorescent light of 15 to 20 watts, exposing the
dial side to the light, and then measure the output voltage.
<Measuring the output voltage for the solar cell unit alone>
Solar cell unit
–
The quick-start function can be checked only when the rechargeable battery voltage is less than 0.9V.
Before checking the function, therefore, be sure to measure the voltage.
(Refer to step 1 in “• Checking the recharging function”.)
•
Checking the quick-start function
Fluorescent light
(15 to 20W)
5cm
<Checking procedure>
•
After checking that the watch stops operating, place
the watch at a distance of 50cm under a fluorescent
light of 15 to 20 watts, exposing the dial side to the
light. Then, check if the second hand starts moving
at 2-second intervals within 10 seconds.
50 cm
Fluorescent light
(15 to 20W)
1) Set the dial to the solar cell unit.
2) Connect the tester as shown in the illustration.
Cal. V14JA
+
