TECHNICAL GUIDE
Cal. V116A
8/16
l
Rechargeable battery and electronic circuit
11 RECHARGEABLE BATTERY UNIT
• How to install
Set the “B” portion of the (-) lead terminal
of the rechargeable battery unit to the
groove of the main plate, and then, set the
“A” portion of the (-) lead terminal to the
guide post of the main plate.
Notes:
* Handle the rechargeable battery unit with care
so as not to short-circuit its (+) and (-) terminals.
Otherwise, the rechargeable battery unit will
be deteriorated.
* Never wash the rechargeable battery unit as
it is an electronic part.
9
CIRCUIT BLOCK COVER
• How to remove
Remove the two circuit block cover screws,
and then, release the two hooking portions
marked with the arrows in the illustration at
right from the main plate.
• How to install
Set the circuit block cover so that the two
hooking portions marked with the arrows in
the illustration at right catch the main plate
securely, and then, tighten the circuit block
cover screws.
Rechargeable battery unit
Guide post
“A” portion of
the (-) lead terminal
“B” portion of
the (-) lead terminal
TG V116A.indd 8
11/08/01 9:55
