16
English
STOPWATCH
●
When button D is pressed to measure a lap time, the lap time measured and lap number remain
displayed for 10 seconds and then, the display automatically returns to the measurement in progress.
●
The lap number counts up to “99”. After “99”, the number is displayed in two digits such as “00” for
100, “01” for 101, and so on.
●
By turning on both the button operation confirmation sound and auto illumination function, a beep
sounds and the display is illuminated every minute to signal the lapse of time for the first 19 minutes.
The beep sounds every minute after the first 19 minutes.
●
Even if the STOPWATCH mode is changed to another while the measurement is in progress, it
continues counting properly and the flashing STOPWATCH mode mark indicates that the stopwatch
is in use. After the stopwatch is used, however, be sure to reset it to prevent the overconsumption
of battery energy that would shorten the battery life.
●
In memory recall after measurement, the oldest measurement in memory is displayed first.
In memory recall during measurement, the newest one is displayed first.
TIMER
●
In the adjustable timer setting, the flashing digits move quickly if button D is kept pressed.
●
If the watch is left untouched in the TIMER SETTING display with the digits flashing, it will
automatically return to the TIMER mode in 2 to 3 minutes.
●
Restart and stop of the timer can be repeated by pressing button C.
●
When the set time is up, a warning sound beeps for 5 seconds. To stop it manually, press any of the
five buttons.
●
After the set time is up, the timer counts down the set time repeatedly. After the timer is used,
therefore, be sure to reset it.
●
After the countdown is repeated 99 times, the number of times the countdown is repeated is displayed
in two digits such as “00” for 100, “01” for 101, and so on.
●
By turning on the button operation confirmation sound, a beep sounds every minute to signal the lapse
of time.
