14
English
●
This watch has a built-in pressure sensor to measure the
altitude (above sea level) and indicates the altitude rank
graphically in four levels.
●
Residual nitrogen, no-decompression limits for the next dive
and other data are calculated taking into account the current
altitude.
●
As you move across altitude ranks, the watch re-calculates
residual nitrogen on the spot.
Altitude rank indicator
Altitude
rank
0
1
2
3
Measurement
error
(Flashing)
Indicator
Nil
0 ~ 900
m
0 ~ 3000
ft
600 ~ 1700
m
2000 ~ 5500
ft
Altitude
above
sea level
1300 ~ 2500
m
4300 ~ 8200
ft
2200 ~ 6000
m
7200 ~ 19700
ft
6001 m and
higher
19700 ft and
higher
Notes:
1. The altitude range in the above table provides general guideline
of altitude only, and the altitude rank indication does not indicate
a specific altitude.
2. If the watch senses an altitude change across altitude ranks, the
residual nitrogen indicator may appear even while you are on the
surface. This is not a malfunction.
●
The measurement units of depth and temperature can be
selected from “meters (m) and centigrade (
°
C)” and “feet (ft)
and Fahrenheit (
°
F)”.
HOW TO SET THE DEPTH & TEMPERATURE UNITS
Press to show DIVE PLAN display.
A
Press for 4 to 5 seconds to change over the depth
and temperature units.
* With each press of the button, the units of depth and
temperature change over alternately between “meters and
centigrade” and “feet and Fahrenheit”.
B
B
A
Depth unit
Note:
Once the units of depth and temperature are set in the DIVE PLAN
display, those in the DIVE LOG display and the DIVE mode will also
be set accordingly.
▼
■
ALTITUDE COMPENSATION
■
SELECTION OF MEASUREMENT UNITS
HOW TO USE DIVE COMPUTER FUNCTIONS