⑥
Specification of Transmitter (for radio receiver built-in type only)
⑤
Specification of Operator
⑦Particulars of Packed Parts
P4
220V
230V
（A）
3.8
3.7
（N･m）
（N･m）
（r.p.m）
（kW）
（r.p.m）
（A）
2.1
2.1
（min）
Operator’s full load current
Single-phase 220-230V （50/60Hz）
Model
ULA-25GSC
Voltage
Output Shaft
Torque
88.2
Min. descent torque
2.3
Rotation speed
24.3/19.4（ascent / descent）
Motor
Output
0.25
Rotation speed
1500/1200 （ascent / descent）
Full load current
Rated time
10 （program control system）
Operation input
3-point pushbutton switch(2a1b)
radio remote controller (can be used together)
Control
Control mode
Microcomputer control
Stop position control
Obstacle sensing mechanism
Pulse detection mode
Upper limit・・・・・・・・ position control mode by pulse detection
Lower limit・・・・・・・・ signal detection mode by counter limit
Specification
Transmitter
Type
AF7-T3
DC3V
(Coin-type lithium battery CR2025)
Battery life
About a year(in case of 10 times of use in a day)
Operating temp.range
0～50℃
Operational humidity range
Up to 85%RH (without condensation)
Code setting
16,777,216 types (set in manufacture)
Transmitting power
Not more than 1mW
Operational distance
10 to 50ｍ appprox. (varying with surrounding environment)
Communication frequency
426.075 MHz
Modulation mode
F1D modulation
Antenna
Resonance method (with built-in printed board)
※The receiver is housed in the control panel.
Item
Rated voltage
Specification
Operator body
Pushbutton harness
Counter harness
Upper & lower limit output
harness
Transmitter(AF7-T3)
Transmitter strap
Antenna
Antenna base
Antenna cable
(with ferrite core)
Cross recessed tapping
screw (M4x6)
Safety circuit breaker
Instruction manual(for installer)
OPERAT OR PAC KAGE
Model
ULA-25GSC
ULA-25GSCR
(with built-in radio receiver)
Standard type / Optional type with Uper-Lower Limit output
－
－
1
1
1
Excluded in standard type / 1: Included in optional type
1
－
1 unit(incl. control panel, limit switch, gravity fall cord w/ caution plate)
Built in device
－
－
1
1
1
1
－
2
