Seiki SK1100T, Руководство пользователя

Страница: 10 / 24

Seiki Cutting Plotter
7
④
Extend the tip of blade by the stretch required for the
desired cutting media (T<5mils) as (Figure 2-5).
Figure 2-5
4. Installation of Pen/Blade Holder
①
Turn off the power.
②
Loose the locking-screw of the holder bracket, then put
the blade holder or pen holder in the V breach and ensure
the blade tip or refill to reach to the protection-strip.
Fasten the locking-screw clockwise at last.
③
After turning on the machine, the tip should raise around
1/8 inches away from protection-strip.