10
CUSTOMIZING TV SETTINGS
Initial Setup
•
Connect one end of the RF coaxial cable (not included) to the aerial socket on
the wall and the other end of the cable to the RF (75) socket at the rear right
bottom view of your TV.
•
Connect the mains cable to the mains socket after you have completed all the
connections.
•
In standby mode, press the button at the bottom right of TV or the button
on the remote control to turn the TV on. The red LED indicator will turn blue.
• The first time you turn your TV on it will go straight to the WELCOME screen.
Please connect the aerial and then press the OK button or press EXIT to go to
the No Signal screen.
• The first time you turn the TV on, press the
buttons to select your desired
mode setting.
•
Press the
buttons to navigate the menu and change the settings.
General Operation
