- 5 -
Remote control (batteries installation)
• The remote control sensor at the front of the soundbar is sensitive to the
remote control’s commands up to a maximum of 6 metres away and within a
maximum arc of 40 degrees.
• Please note that the operating distance may vary depending on the brightness
of the room.
• Remove the battery compartment located on the back of
the remote control.
•
The unit comes standard with a battery installed. To avoid
discharging it, it is locked with a plastic tape. Remove the
tape to activate the battery.
• If you have to change, insert a CR2025 3V battery,
observing the correct polarity.
• Replace the battery compartment.
Remote control battery replacement
POWER
AUX
LINE
MUSIC
BASS+
VOL+
VOL-
BASS-
TREBLE-
MOVIE
VOICE
PAIR
OPT
BT
COAX
MUTE
Long press the pair button to disconnect
bluetooth and search for the equipment again.
PAIR button
Adjust the volume.
VOL +/- buttons
(It must be in mode of MUSIC.)
BASS+/BASS- buttons
Silence the unit or restore the sound.
MUTE button
OPTICAL Input Buttons.
OPTICAL button
COAXIAL Input Buttons.
COAXIAL button
AUX for RCA L/R input.
AUX button
Play/pause/resume playback in Bluetooth
mode.
button
Skip forwards to the next track in Bluetooth
mode.
button
Switch the unit between On and Standby
mode.
button
Line In for 3.5mm input.
LINE button
Bluetooth Input Button.
BT button
Press the button to select a desired music
mode: MUSIC, MOVIE,VOICE.
Music/Movie/Voice buttons
(It must be in mode of MUSIC.)
/Treble- buttons
Skip backwards to the beginning of the track
or to the previous track in Bluetooth mode.
button
